About Our Design

Craftsmanship Display

1.Basic Structure: For individual cabinet units: The 18mm side panels extend to the floor and encompass the top and bottom panels. The top and bottom panels are 18mm thick. Adjacent cabinets have independent side panels.For shared-side panel structure: The 18mm side panels extend to the floor and encompass the top and bottom panels (18mm thick). Adjacent cabinets share partition panels.

2.Internal Setback Relationship: Inside the cabinet, the default fixed shelf is set back by 1mm. Combination shelves / adjustable shelves are set back by 2mm.

3.Back Panel: 18mm thick back panel, connected to side panels and top/bottom panels using connectors. 9mm thin back panel, with slots on side panels and top/bottom panels. The back panel is defaulted to be recessed by 10mm.

4.Toe Kick:Toe kicks can be made as 18mm or 27mm high base panels, or as toe kick boards over 35mm in height. Cabinet adjustable feet can be installed.

5.Drawer: The drawer box is only available in one type with 18mm board thickness and adopts a three-in-one connector system.

6.Edge Banding Process: Edge banding veneer thickness is 1mm. PUR machine edge banding is used, with manual edge banding for special-shaped panels. The size range for machine edge banding is >35mm.

Cabinet Type Labels:

• Wall Cabinet / Upper Cabinet

• Tall Cabinet / Pantry Cabinet

• Base Cabinet

Closet System